fabiolagana.net » m0n0wall http://blog.fabiolagana.net 640 Kb should be enough memory for anybody Mon, 26 Oct 2009 13:17:04 +0000 http://wordpress.org/?v=2.9 en hourly 1 Write img m0n0wall with Mac OS X http://blog.fabiolagana.net/write-img-m0n0wall-with-mac-os-x/ http://blog.fabiolagana.net/write-img-m0n0wall-with-mac-os-x/#comments Wed, 07 Feb 2007 08:23:27 +0000 Fabio Laganà http://blog.fabio.lagana.name/?p=27 Tested on 10.4.8. It is recommended that you disconnect all disks except for your startup disk before carrying out this procedure, as an error in specifying the drive to be written to could cause data loss.

* Plug in your CF reader with CF card inserted
* If OS X pops up a message saying that the card could not be read, click Ignore.
* Open Disk Utility
* Select any Partitions of your CF Card that are mounted, and click the unmount button. The partitions should now appear greyed out.
* Select your CF Card Reader in the left-hand column, and click the Info button
* Note the ‘Disk Identifier’: e.g. ‘disk1′
* Open Terminal
* cd to the directory containing the pfSense image
* Use this command:

gzcat net45xx-1.xx.img | dd of=/dev/disk[n] bs=16k
]]> http://blog.fabiolagana.net/write-img-m0n0wall-with-mac-os-x/feed/ 0